Ten Questions to Ask Before Signing a Co-Manufacturer in Sri Lanka

By Silk Foods Ceylon ·

Ten Questions to Ask Before Signing a Co-Manufacturer in Sri Lanka

By the Silk Foods Ceylon Editorial Team

Buyer’s snapshot

  • Ten questions cover what a signature actually commits you to: audit status, batch trace, recall, insurance, recipe ownership and what a plant visit should confirm.
  • Two public registers let you check a certificate in minutes: the BRCGS Directory and the FSSC Public Register (both live in 2026). A copy of a certificate is not proof.
  • Traceability means being able to say where a food came from (one step back) and where it went (one step forward), per the Codex guideline CXG 60-2006.
  • Silk Foods Ceylon (SFC) welcomes these questions in writing and a visit to the Matale plant. Small runs are welcome and quoted on request.

Most brand owners compare co-manufacturers on the quote. The quote is the easy page to compare. The page that matters arrives eight months later, when a retailer asks for a batch record, a customer reports a problem, or you want to move the recipe to another plant.

This guide gives ten questions to put to any co-manufacturer in Sri Lanka, Silk Foods Ceylon (SFC) included, before a contract is signed. For each one it says what a good answer looks like and what should slow you down. It is written for a brand owner with a working recipe and a first commercial run in view. If you are still comparing price lines, read how to read a contract manufacturing quote first, then come back.

What are the ten questions, at a glance?

The table is a one-page version you can paste into an email. The sections after it explain the reasoning.

#AskA good answerSlow down if
1Which audit covers this site and my product type?Certificate number, scope, dates, register entryOnly a photocopy, or a scope that omits your category
2What did the last audit find?Summary of findings and closed corrective actions”We always pass” with nothing in writing
3Can you trace one batch both ways?A live demonstration or recent mock tracePaper records that take days to assemble
4What is the recall procedure?Named roles, contact route, brand owner’s partNo written procedure
5What insurance is held?Certificate of insurance, recall cover stated separately”Our general policy covers it”
6Who holds the master recipe?You do; plant access is confidential and writtenThe plant keeps the only complete formula
7What else runs on the line?Allergen map and changeover methodNo answer on shared allergens
8How are raw materials approved?Approved supplier list, incoming checks, COA reviewSubstitutions made without sign-off
9How are changes handled?Written change notice and your approvalChanges learned from the label
10What should a reference visit confirm?A walk of the flow and a look at real recordsA visit limited to the meeting room

Which audit covers the plant, and is it current?

Start with the certificate, but do not stop at the paper. A certificate names a site, a scope and a date range. Your product has to fall inside that scope, and the dates have to be live.

Two public registers make this a ten minute job. The BRCGS Directory lists certified sites and shows the audit details, though not the full report (SGS, 2026). The FSSC Public Register lists certified organisations with their scope statement and food chain categories, and FSSC’s own guidance says verification should not rely on a copy alone (FSSC, 2026). Search the plant’s name on the register, then match the scope to what you plan to make: capsules, powders, tea, bottled goods.

BRCGS audits also carry a grade, and a grade earned in an unannounced audit carries a plus sign (SGS, 2026). Ask which kind the site had. Unannounced is the harder test to pass, and it tells you more than a visit the plant prepared for.

SFC is BRCGS- and FSSC 22000 V6-audited, with USDA Organic and EU Organic on qualifying recipes. Ask any plant to show you the same evidence, and ask SFC too.

What did the last audit find?

A pass is not the interesting part. The findings are. Every audit raises some, and what you want to know is whether the plant closes them and how fast.

Ask for a summary of the last audit’s non-conformities and the corrective actions that closed them. A plant that shares this is telling you it manages by evidence. A plant that says “we always pass” and offers nothing in writing has told you something else. Some plants will not hand over the full report, which is reasonable. A summary is a fair request.

If the plant has no third party audit at all, the rest of this guide gets harder, not easier. You are then relying on your own audit, and the cost of that falls on you. The post on moving from an informal co-packer to a certified line covers what changes.

Can the plant trace one batch back and forward?

Traceability is the question that separates a record system from a filing cabinet. The Codex guideline CXG 60-2006 defines the tool plainly: it should identify, at any specified stage, where a food came from (one step back) and where it went (one step forward) (Codex Alimentarius, 2006).

Turn that into a test. Pick one finished batch code from a similar product and ask the plant to show you, live, three things: the raw material lots that went in, the processing record for that day, and the dispatch record showing which customers received it. Time it. Then ask when the plant last ran a mock recall and what the result was.

One honest limit. Codex notes that tracing does not improve safety by itself; it works alongside other controls. So a good trace is necessary, not sufficient. It tells you that when something goes wrong, the plant can find the boundary quickly.

Your own labelling matters here. If the batch code on your pack does not map to the plant’s batch record, nobody can trace anything. The post on the quality records a food maker keeps before launch lists what to set up.

Who calls a recall, and who pays for one?

Ask to see the written recall procedure. It should name roles, not just departments: who decides, who contacts the retailer, who contacts you, and who notifies the authority. It should also say what the brand owner does, because the brand on the label is usually the name a retailer and an inspector call first. Sri Lanka’s Food Act No. 26 of 1980 makes selling unsafe food an offence, and the practical effect is that the seller answers for it, whoever made it (Food Act, FAOLEX summary, 2026).

Then ask the money question, covered next. A recall procedure with no one paying for the recall is a document, not a plan.

What insurance does the plant hold?

Product liability and product recall are usually separate cover. New Zealand’s food regulator notes that recall insurance is often excluded from standard business policies and has to be arranged on purpose (MPI, 2026). The same logic applies anywhere: a general policy may pay for a customer’s injury and say nothing about the cost of pulling stock.

Ask for the certificate of insurance. Ask whether recall is covered, and whether your brand can be named as an additional insured. Ask what the plant’s contract says about who bears recall costs and where liability is capped. The limits themselves belong in your contract, so this post does not suggest a number. Have your own insurer review the draft too, since your brand carries the exposure on the shelf.

Who holds the master recipe?

This is the question brand owners ask last and regret first. The recipe is yours. The agreement should say so, and it should say how the plant may use it.

Sri Lanka’s Intellectual Property Act No. 36 of 2003 protects undisclosed information against disclosure or use contrary to honest commercial practice, though trade secrets are not registered and protection leans on showing the owner kept the information confidential (Legal500, 2026). That is a reason to write things down before the first sample ships. A short confidentiality clause, a list of who at the plant sees the full formula, and a plain statement of what happens to the formula and batch records if you leave.

If the plant develops the formula, ask who owns it at the end. Our post on who owns what in private label and contract manufacturing sets out the three common arrangements.

A warning sign: the plant keeps the only complete version of your formula. If you cannot take the recipe elsewhere, you are not buying manufacturing. You are renting a dependency.

What else runs on the line, and how are changeovers handled?

A shared line is normal and efficient. A shared line with no allergen map is a risk. Ask which allergens are handled on the equipment your product will use, how the line is cleaned between products, and how the plant verifies the clean.

The right answer is specific: a changeover procedure, a check method, and a rule on scheduling allergen products last in a run. The wrong answer is “we clean everything well”.

How does the plant approve raw materials and suppliers?

Ask whether you can nominate a supplier or must use the plant’s approved list, and how a new supplier is approved. Ask what is checked when a lot arrives, and whether a certificate of analysis is reviewed or just filed.

If a herb or ingredient is short, who decides on the replacement? The answer should be “you do, in writing”.

How are changes to the product handled?

Recipes drift, suppliers change and packaging runs out. The question is whether any of it reaches you before it reaches the shelf. Ask for the plant’s change procedure: a written notice, your sign-off, and a record of the batch where the change began.

A changed ingredient can change an allergen declaration, so learning about it from the label proof is too late.

What should a reference visit confirm?

A visit is where the other nine answers meet the floor.

  1. Walk the product flow from goods in to dispatch, in the order a batch moves.
  2. Ask to see one real batch record for a similar product, and check it matches what you were told about traceability.
  3. Look at the allergen and changeover signage at the line you would use.
  4. Ask to speak to the QA lead, not only the sales contact.
  5. Ask whether an existing client will take a reference call, and accept that some will not, since permission rests with the client.

At the SFC plant in Matale, the cellular layout shows within minutes of walking in: capsule filling, spray drying, grinding and tea bagging areas, with equipment moved between configurations as products change. That layout is exactly why the changeover question (question 7) deserves a real answer on the floor rather than in a meeting. The R&D team and the adjoining plantation are on the same property, so samples can be approved in person.

After the visit, write down what you saw against each of the ten questions. Where an answer was verbal, ask for it in writing before you sign.

Where is this guide the wrong first step?

Be honest about fit. These questions suit a brand with a recipe that works and a clear first run. They are the wrong first step if the formulation is still moving. In that case spend the first weeks on development. SFC’s R&D team works to a maximum of 3 to 4 weeks from signed brief to approved formulation, and the questions above come after that, not before.

They do not replace a retailer’s own supplier approval, which has its own steps. For the cost side, see who carries risk across the three service models. For hotel and restaurant buyers with a spec sheet, the HORECA co-manufacturer checklist is the shorter version.

If you are replacing an existing supplier, add one more question to the ten: how the audit chain and batch records hand over. The post on switching co-packers covers that.

Frequently asked questions

How do I check a co-manufacturer’s food safety certificate?

Search the plant’s name on the public register that matches the certificate: the BRCGS Directory or the FSSC Public Register. Confirm the site, the scope and the dates, and check that your product category sits inside the scope. FSSC advises that a copy of a certificate alone is not sufficient verification (FSSC, 2026).

What is traceability in a food plant?

It is the ability to follow a food through production and distribution. Codex CXG 60-2006 describes it as identifying where a food came from (one step back) and where it went (one step forward). In practice, test it: ask the plant to trace one finished batch to raw material lots and customers.

Who owns a recipe made at a Sri Lankan contract manufacturer?

It depends on the agreement. A recipe the brand owner brings stays theirs, and the contract should say so. Sri Lanka’s Intellectual Property Act No. 36 of 2003 protects undisclosed information, but only where confidentiality was kept (Legal500, 2026). Put ownership and exit terms in writing before the first sample.

Does Silk Foods Ceylon offer contract manufacturing for new brands?

Yes. Silk Foods Ceylon (SFC) offers Contract Manufacturing, Private Labelling and Co-Packing at its Matale facility, with in-house R&D of 3 to 4 weeks at most from signed brief to approved formulation. Small runs are welcome and quoted on request. Send a brief to b2b@esilkroute.com.lk.

How Silk Foods Ceylon can help

For local FMCG brands choosing a first co-manufacturer, Silk Foods Ceylon (SFC) runs Contract Manufacturing from its Matale facility, with Private Labelling and Co-Packing alongside. Small first runs are welcome and quoted on request. The in-house R&D team agrees a formulation within 3 to 4 weeks of a signed brief at most, and the plant is open for the kind of visit described above. The facility is BRCGS- and FSSC 22000 V6-audited, and SLSI submission support is part of a standard engagement.

To brief a project, email b2b@esilkroute.com.lk or call +94 77 157 7294.

Sources

This guide gives general buying guidance, not legal or insurance advice. Check current register entries and the official texts above, and have a lawyer and your insurer review any contract before you sign.

Thinking about making this product?

Tell us what you want to make and our team will come back with a plan, samples and a price.