Toll or Full Service: Who Should Buy the Ingredients for Your Run?
By the Silk Foods Ceylon Editorial Team
Buyer’s snapshot
- Toll means you buy and deliver the ingredients and pay a conversion fee. Full service means the factory buys them and quotes one price per unit.
- Ingredients you buy and store cost money to hold: the weekly average weighted prime lending rate was 11.16 percent in the week ended 9 October 2026 (Central Bank of Sri Lanka).
- On an illustrative 250 g jar, full service was about 6 percent cheaper at 2,000 jars and toll about 4 percent cheaper at 20,000.
- Silk Foods Ceylon (SFC) quotes on request and will price either model, or a mix. The table below shows how to rebuild the sums with your own numbers.
Every quote for a food run hides a question that rarely gets asked out loud: who buys the ingredients? In a toll arrangement, you buy them, deliver them to the factory and pay for line time. In full service, the factory buys against your specification and quotes one price per unit. Same recipe, same jar, two very different sets of risk.
This guide compares the two on an illustrative 250 g jar at 2,000 units and at 20,000 units, sets out who carries which risk, and flags what Sri Lankan import rules and borrowing costs add. It is written for a founder or brand manager with a locked recipe. For the wider map of who carries what, read who carries risk in contract manufacturing, private label and co-packing; for the price line itself, see how to read a contract manufacturing quote.
What do toll and full service mean on a Sri Lankan food line?
Under toll manufacturing, the brand owner buys, owns and delivers the ingredients, and the factory charges a conversion fee for processing and filling them. Under full service, the factory buys the ingredients against the brand owner’s specification and quotes a finished price per unit. Most real arrangements sit somewhere between the two.
Co-packing is a third thing. There the buyer supplies finished goods and the factory only packs, seals and labels, as covered in the co-packing guide. Toll sits one step earlier in the chain: raw materials go in, a finished product comes out.
The hybrid is the common case. A factory may buy sugar, oil, coconut and packaging from suppliers it already uses, while the brand owner supplies one proprietary component, such as a spice premix. Whatever the split, write it down line by line. The cost surprises in food contracting almost always live in the line nobody assigned.
How does the same run price under each model?
The table below prices one illustrative 250 g jar of a spiced coconut spread under both models at two run sizes. Every figure is an assumption built to show the arithmetic. None is an SFC quote, price list or minimum order, and your own numbers will differ.
The assumptions are simple. At 2,000 jars, a brand owner buying alone faces supplier lot sizes and pays about 20 percent more per jar-equivalent than at 20,000. A factory buying common ingredients in lots it already uses avoids most of that premium, and adds a 10 percent handling margin. Conversion is the same under both models and falls with run size, because changeover is spread over more jars. Cash is tied up for eight weeks at 12 percent a year, a little above the prime rate because that rate is for the strongest borrowers.
| LKR per jar (illustrative) | Toll, 2,000 jars | Full service, 2,000 jars | Toll, 20,000 jars | Full service, 20,000 jars |
|---|---|---|---|---|
| Ingredient bill | 360 | 352 | 300 | 330 |
| Conversion fee | 190 | 190 | 120 | 120 |
| Inbound freight, receiving, testing, storage | 20 | 0 | 8 | 0 |
| Cost of cash tied up | 7 | 0 | 6 | 0 |
| Total | 577 | 542 | 434 | 450 |
The full service ingredient figures are the factory’s cost plus the 10 percent margin: LKR 320 becomes 352 at 2,000 jars, and LKR 300 becomes 330 at 20,000. The toll cash figures follow from ingredients worth about LKR 720,000 and LKR 6 million held for eight weeks.
Where does each model win at 2,000 jars versus 20,000?
On these assumptions, full service wins the small run and toll wins the large one. At 2,000 jars, toll costs LKR 35 more per jar, about 6 percent, or LKR 70,000 over the run. At 20,000 jars, full service costs LKR 16 more per jar, about 4 percent, or LKR 320,000 over the run.
The small-run result comes from buying power. A factory that already buys coconut, chilli and sugar in volume can spread a lot across several customers. You cannot. Add inbound handling and the cost of cash, and the small run punishes the brand owner who buys alone.
The large-run result is a margin story. A 10 percent handling margin on an ingredient bill of LKR 300 per jar comes to LKR 30, which is LKR 600,000 over 20,000 jars. Your own inbound and cash costs total LKR 14 per jar, or LKR 280,000. The LKR 320,000 gap is what remains. The crossover sits somewhere between the two run sizes, and it shifts with the ingredient mix. A bill dominated by one imported ingredient moves it one way, a bill of common local inputs moves it the other.
Neither result is a verdict. It is a method. Ask for the quote with ingredients and conversion shown as separate lines, then rerun the table. The four levers that lower a co-manufacturing quote are worth reading alongside it, because run size and formulation choices move both columns.
Who carries each risk under toll and under full service?
Under toll, the brand owner usually carries the risks attached to the materials: price, supply, incoming quality, storage and leftovers. Under full service, the factory usually carries most of them and prices them in. Usually is the operative word, because the contract allocates every one of these, and a silent contract allocates them badly.
| Risk | Toll: who usually carries it | Full service: who usually carries it |
|---|---|---|
| Ingredient price moves after the order | Brand owner | Factory, until the quote expires |
| Late or short delivery of materials | Brand owner, and the line slot may be lost | Factory |
| Incoming quality and certificates of analysis | Brand owner supplies, factory checks against the specification | Factory buys to specification and checks |
| Storage and shelf life before use | Brand owner until delivery, then as agreed | Factory |
| Yield loss above the agreed yield | Set by contract, often the brand owner | Set by contract, usually priced in |
| Leftover ingredients after the run | Brand owner, who owns the stock | Factory, unless the contract passes it on |
| Cash tied up before production | Brand owner | Factory, recovered in the unit price |
Yield deserves its own sentence. A toll agreement should state the agreed yield and who pays for losses above it, as the trade guides listed under Sources note. Without that sentence, a short batch becomes an argument about whose fault the missing kilograms are. The warehousing and stock ownership guide covers who owns stock that sits on a factory floor.
What does buying your own ingredients demand of you?
Buying your own ingredients demands a receiving discipline: a written specification, a certificate of analysis for every lot, a place to store the material and a person who answers when a delivery is wrong. If any of those is missing, toll moves risk onto you without moving the saving.
Imports add time. In June 2026 a Trade Ministry meeting addressed delays in inspections carried out by the Sri Lanka Standards Institution, the Plant Quarantine Unit, the Food Control Unit and other agencies, with decisions aimed at faster clearance (Daily Mirror, 27 June 2026). A lot stuck in inspection is a line slot you may lose.
Tariffs are moving as well. The Cabinet approved on 3 March 2026 a phased removal of cess on 2,634 tariff codes over four years, including 697 intermediate goods between 2026 and 2028 (Daily FT). Whether your ingredient is on that schedule is a tariff-code question for your clearing agent, not a general rule. Where it is, the toll column in the table improves over time. Where it is not, it does not.
Borrowing costs sit in the same sum. The weekly average weighted prime lending rate was 11.16 percent in the week ended 9 October 2026 (Central Bank of Sri Lanka), the rate for the strongest borrowers. A smaller brand will usually pay more, and every rupee of ingredients waiting in a store room earns nothing.
Where SFC walks away
Toll is a poor fit for a brand with nobody to receive and inspect materials, no storage, and no certificate of analysis habit. Full service is the honest answer there, and the quote-ready pack of five inputs is the place to start.
When does a hybrid beat both?
A hybrid beats both when one ingredient behaves differently from the rest of the bill. Let the factory buy what it already buys at volume, and supply yourself only the item that is proprietary, imported at your own scale, or priced far better through your own supplier. You take on one receiving task instead of ten.
Consider a typical sequence. A brand launches a spiced spread under full service at 2,000 jars, because the factory’s buying power wins the small run. Eighteen months later, volume has grown and one spice blend, bought through the brand’s own supplier, has become the most expensive line on the bill. The brand moves that single lot to buyer-supplied and leaves the other ingredients with the factory. On the illustrative numbers, that captures part of the large-run saving without taking on the whole inbound burden.
It also protects the recipe, which links to ownership. A separately supplied component keeps the most sensitive part of the formula out of the factory’s stores, a point set out in recipe ownership at a Sri Lankan co-manufacturer. Where you are still deciding whether to make the product locally at all, the make it locally or import it comparison sits upstream of this choice.
Buyer’s checklist: settle these before you pick a model
- A quote that shows ingredients, conversion and packaging as separate lines.
- A named list of which materials each side buys.
- An agreed yield and a rule for losses above it.
- A specification and a certificate of analysis requirement for every buyer-supplied lot.
- A latest-delivery date for your materials, and what happens to the slot if they are late.
- Who owns and who pays for leftover stock.
- Your own cost of cash, entered in the sum.
Frequently asked questions
What is the difference between toll and full-service contract manufacturing?
In toll manufacturing the brand owner buys, owns and delivers the ingredients, and the factory charges a conversion fee. In full service the factory buys against your specification and quotes one finished price per unit. Most real arrangements mix the two, so state which materials each side buys.
Is toll manufacturing cheaper at larger runs?
Often, but not always. In the illustrative model in this guide, toll was about 4 percent cheaper per jar at 20,000 jars and about 6 percent dearer at 2,000 jars. The result moves with your ingredient mix, your buying power and your cost of cash, so rebuild the table with real quotes.
Who pays if ingredients I supply arrive short or fail testing?
The contract decides, and under toll the brand owner usually carries it. Agree a specification, a certificate of analysis requirement, an agreed yield and a rule for losses above it before the first delivery. Imported lots add clearance time, and the Trade Ministry took up inspection delays in June 2026.
Does Silk Foods Ceylon quote both toll and full service?
Silk Foods Ceylon (SFC) quotes on request and will price full service, buyer-supplied lots or a mix of both. Small runs are welcome. Send your ingredient list, the run size you have in mind and your preferred model to b2b@esilkroute.com.lk, and the quote will show each cost line separately.
How Silk Foods Ceylon can help
For brand owners weighing toll against full service, Silk Foods Ceylon (SFC) runs Contract Manufacturing from its Matale facility and will quote on request with ingredients and conversion shown as separate lines. Small first runs are welcome. Allow 2 to 3 weeks from a locked recipe to a first commercial run; where the in-house R&D team develops the formulation first, that takes 3 to 4 weeks at most from signed brief to approved formulation. The facility is BRCGS- and FSSC 22000 V6-audited, and SLSI submission support is part of a standard engagement.
To brief a project, email b2b@esilkroute.com.lk or call +94 77 157 7294.
Sources
- Central Bank of Sri Lanka, Weekly Economic Indicators, 9 October 2026, reporting the weekly Average Weighted Prime Lending Rate at 11.16 percent. Retrieved 2026-11-20. https://www.cbsl.gov.lk/sites/default/files/cbslweb_documents/statistics/wei/WEI_20261009_e.pdf
- Daily FT, “Govt. to scrap cess on 2,634 imports in four-year reform push”, on the Cabinet decision of 3 March 2026. Retrieved 2026-11-20. https://www.ft.lk/front-page/Govt-to-scrap-cess-on-2-634-imports-in-four-year-reform-push/44-789135
- Daily Mirror, “Trade Ministry moves to speed up food import clearance”, 27 June 2026. Retrieved 2026-11-20. https://www.dailymirror.lk/print/breaking-news/Trade-Ministry-moves-to-speed-up-food-import-clearance/108-344088
- Global Sources, “Toll Manufacturing vs Contract Manufacturing: What’s the Difference?”, a trade guide on who sources materials under each model. Retrieved 2026-11-20. https://www.globalsources.com/knowledge/toll-manufacturing-vs-contract-manufacturing-what-s-the-difference/
- GHJ Advisors, “Turnkey manufacturing vs toll manufacturing”, an advisory guide on agreed yield in toll agreements. Retrieved 2026-11-20. https://www.ghjadvisors.com/ghj-insights/turnkey-manufacturing-vs-toll-manufacturing
All LKR figures in the worked example are illustrative assumptions, not quotes. This guide gives general buying guidance, not legal or financial advice. Check tariff codes with your clearing agent and have contract wording reviewed before you sign.


